STAUF adhesives are designed to support a wide range of flooring installations. From hardwood and engineered wood to vinyl and specialty surfaces. With options for moisture control, sound barriers, and freeze/thaw stability, each product meets rigorous performance and environmental standards. Explore the selections below to find the right fit for your project.
Hardwood and Engineered Flooring Adhesives
All stocked hardwood and engineered flooring adhesives are LEED-qualified, contain no VOCs, are approved for use with radiant heated floors, and have no flash time. Spread rates, recommended trowels, approved subfloors/floor finishes, and more detailed technical information can be found in the individual technical data sheets.
STAUF SMP 960 3-in-1
Polymer-based wood flooring adhesive
Suitable for use with any width engineered wood
Suitable for use with up to 7” wide solid wood
Moisture and sound barrier in one step
Contains a clip-on #12 trowel in every pail
IIC rating up to 74 dB
STC rating up to 72 dB
Can replace double glue down
Can be used as a moisture barrier
Freeze/thaw stable
Will not etch the floor finish
STAUF PUM 950 Power-Mastic
Urethane-based wood flooring adhesive
For use with any width engineered wood
For use with up to 7” wide solid wood
Has the strength of a urethane but cleans like a polymer
Does not contain isocyanates
Very high shear strength
Can be used as a moisture barrier *
Freeze/thaw stable
Will not etch the floor finish
*#12 clip-on trowel must be purchased separately if being used as a moisture barrier.
STAUF PUM 955 Ultra-Nail
Urethane-based wood flooring adhesive
For use with any width engineered wood
For use with up to 7” wide solid wood
Exact same adhesive as PUM 950 but packaged differently to be used for glue assist installations
Has the strength of a urethane but cleans like a polymer
Does not contain isocyanates
Very high shear strength
Freeze/thaw stable
Will not etch the floor finish
STAUF SMP 920 Contractor Polymer
Polymer-based wood flooring adhesive
For use with any width engineered wood
For use with up to 3” wide solid wood
Can be a moisture and sound barrier in one step *
IIC rating up to 74 dB*
STC rating up to 62 dB *
Can replace double glue down *
Can be used as a moisture barrier *
Freeze/thaw stable
Will not etch the floor finish
*#12 clip-on trowel must be purchased separately for vapour and sound barrier properties.
STAUF SMP 925 Poly-Link
Polymer-based wood flooring adhesive
For use with any width engineered wood
For use with up to 3” wide solid wood
Exact same adhesive as SMP 920 but packaged differently to be used for glue assist installations
Freeze/thaw stable
Will not etch the floor finish
STAUF TGL 810 Tongue & Groove
PVA dispersion-based wood flooring adhesive
For use with any width engineered wood
Superior bond strength
Excellent spread rate
Applies easily
Resistant against aging
Allows normal dimensional changes in wood flooring
Other Flooring Adhesives
All stocked resilient flooring adhesives are LEED-qualified, contain no VOCs, are approved for use with radiant heated floors. Spread rates, flash times, recommended trowels, approved subfloors and more detailed technical information can be found in the individual technical data sheets.
STAUF R 701 Xtrem-Link
Two-part urethane resilient flooring adhesive
For use with; LVT, VCT, rubber flooring, sports flooring, linoleum, underlayments, cork flooring, synthetic turf and
Clean alternative to two part epoxy adhesives
Suitable for indoor and outdoor use
Must be installed wet
Permanent bond
Up to 100% RH
STAUF D737 High-Tack
LEED qualified
contains no chlorinated solvents
contains no solvents
contains no VOC
certified “green”
certified “very low emission”
nonflammable
ozone friendly
dispersion base cleans with water
freeze/thaw stable
Applicable to LVT, VCT, Carpet Tile, Sheet Vinyl, Linoleum, Cork, and Rubber*
STAUF LVP777 Pro-Lux
Universal flooring adhesive
For use with; LVT, VCT, sheet vinyl or linoleum (homogeneous or foam backing, structured or rubber backed), carpet (felt, fiber, jute or woven vinyl backed) and most underlayments
Can be installed wet or pressure sensitive (see technical data sheet)
Flashes quickly
Can be installed over a non-porous sub-floor
Can be installed over cutback mastic (see technical data sheet)
Up to 99% RH
STAUF PSA 832
High performance pressure sensitive adhesive
For use with; LVT, VCT, sheet vinyl (fiberglass reinforced), carpet tile, carpet cushion and a lot of underlayments
Tenacious bond
Long working time
Can be rolled on for carpet tile installation
Mounting Adhesive, Primer and Wood Floor Repair Kit:
These are all LEED-qualified and contain no VOCs. Spread rates, flash times, recommended usage methods, approved subfloors, and more detailed technical information can be found in the individual technical data sheets.
STAUF M400 Endura-Tac
Premium universal flooring adhesive
Moisture cured urethane
Most commonly used for flooring accessories like reducers, t-caps, stair nosings and cove base
Fast grab and less slippage
Resistant against aging
Remains elastic
Waterproof when cured
Freeze/thaw stable
Will stick most things to most things
STAUF AQP 200 Eco-Prime
Acrylic-based primer
Increases the bond between subfloors and floor finishes
Use prior to cementitious or gypsum-based leveling compounds
Penetrates deep and leaves a rough texture to assist in adhesion
Spreads easily
Excellent coverage
Dries very quickly
IKF100
Wood flooring repair kit
Fills voids, hollow spots and popping under engineered or solid wood flooring
Kits contain; 1 quart of urethane based adhesive, two syringes, four dowels, two drill bits and two small cups
Designed to repair voids caused by various reasons such as; uneven subfloors, improper curing of adhesive, open times prolonged, improper trowel usage, water damage, dimensional stability of wood flooring
For specific architectural information, please email us at spec@goodfellowinc.com.
